Home | GPS | SUUNTO Watches | Special Offers | Deutsch
	Edge 205 | Edge 305 | Edge 605 | Edge 705 | Forerunner 205 | Forerunner 305 | Forerunner 310XT | Forerunner 405 | Foretrex 301 | Foretrex 401 | Geko 201 | Geko 301 | eTrex H | eTrex Summit HC | eTrex Venture HC | eTrex Vista HCx | Oregon 200 | Oregon 300 | Oregon 400t | Oregon 550t | GPSMAP60Cx | GPSMAP60CSx | GPSMAP76C/x | GPSMAP76CS/x | Nüvi 550 | Nüvi 765T | Nüvi 865T | Nüvi 5000 | Nüvifone G60 | Zumo 550 | Zumo 660 | StreetPilot c3xx/c5xx | cfQue 1620 | GPS18 | TracPak | MapSource | Options | Buyer's Guide | Shopping basket

• This update extends the user interface (GUI) of the GARMIN iQue 3600E to English, French, German, Italian, Spanish.
• This update does not change the voice guidance. Install the audio files for the voice prompts from the setup CD if needed.
• This update requires iQue Palm OS V5.2.1 Release 3 English to be installed, see Release 3 for v5.2.1.

Update to multilingual user interface (Palm application, requires a PC and a connection cable or a docking station, 2.9 MB)

See instructions for using this software after the list of changes and enhancements !

1. Download and save iQue3600EFIGS_Release3.zip to a location on your computer. Unpack the file into a folder of your choice. This will create the following 3 files:
   1. iQue 3600 EFIGS Release 3.txt: This text
   2. Updater.prc: Palm update program
   3. UpdaterData.PDB: File that contains the actual updates
   
   
   
2. Place the iQue in the cradle and perform a HotSync on the unit to back up any of your current data. Make sure all user data has been saved correctly and completely ! During the update process, all user data will be permanently erased from the iQue. Please ensure that the iQue is fully charged before proceeding with the software update process.
   
   
3. Perform a Hard Reset of the unit. To perform this procedure, you will need the reset tip tool, which may be unscrewed from the head of the stylus that came with your iQue. The following instructions are also included on page 1.6 of the iQue 3600 Integrated Handheld Operating Instructions manual:
   1. With the unit turned off, press and hold in the reset button on the back of the unit using the reset tip tool.
   2. Continue to hold in the reset button while you press and hold the power button.
   3. While holding in the power button, remove the reset tool from the reset hole.
   4. Continue holding the power button until the Palm logo appears on the screen.
   5. Once the Palm logo appears, release the power button.
   6. Press the up button when prompted to confirm the erase of user data. This will permanently erase all user data.
   
   
   
4. A new User for the software update will need to be created for use during the software update process:
   1. Start by launching the Palm Desktop application.
   2. Go to the Tools menu, then select Users... to display a list of the current users.
   3. Click on the New... button to display the New User window.
   4. Enter a unique name for the User, such as Update, and then click OK.
   5. Close out of the Users window by clicking OK.
   
   
   
5. If you are using Intellisync Lite or another synchronization program, from within that program, configure your new user to synchronize with the Palm Desktop or any available alternative that does not contain your primary data.
   
   
6. Install the software update to the new user (Update):
   1. Double click the Updater.prc file created in step 1. This will open the Palm Desktop Install Tool.
   2. Select the new user that you have created (Update), and click OK.
   3. Double click the UpdaterData.pdb file to place it in the Palm Desktop Install Tool.
   4. Close the Palm Desktop Install Tool by clicking Done, then click OK.
   
   
   
7. Place the iQue in the cradle and initiate a HotSync. A Select User window will appear. Select the new user (Update) that you have created for the update. The Updater.prc and UpdaterData.pdb files will then be installed on the iQue.
   
   
8. Remove the iQue from the cradle. It is very important that the iQue's battery does not run out during the updating process, so please verify that it is fully charged.
   
   
9. Locate the Application called Updater. It can be found under the category of All. Once you have located the Updater Application, tap on it once. Then follow the on-screen instructions.
   
   
10. After about 4 minutes, the green light at the top of the unit will turn off. Once the green light at the top of the unit has disappeared, perform a Soft Reset using the reset tip tool. To perform a Soft Reset, press the reset tip tool into the Reset hole on the back of the iQue. The unit will restart within about ten seconds of the Soft Reset and prompt you to choose one of the following laguages for the user interface: English, French, German, Italian or Spanish. Make your choice and then follow the on-screen setup instructions.
    
    
11. To restore your previous information to the iQue, place the iQue in the cradle, then perform a HotSync. A window will appear asking to select a User. Select the User name that you have been previously been using to identify your iQue on your PC, and your information will be restored to the iQue.
    
    
12. Delete the temporary user (Update) by going back to the Users window in the Palm Desktop. Select the user, click Delete... then click YES to delete it.

To table of contents

TRAMsoft GmbH Laettenweg 19 / CH-8335 Hittnau / Switzerland Telephone: +41 44 995 1570 / Contact Last modification: 12/13/2009 (RA) (This document was created with TRAMsoft XbCMS V1.3-00, does not require any browser specific features and is compliant with the W3C standard "HTML 4.01 Transitional")